LANYTUCANO Lanyu Tucano ARF

LANYTUCANO Lanyu Tucano ARF

THIS ITEM DOES NOT QUALIFY FOR FREE SHIPPING

 

SPECS:

• Wing Span 48 inches
• Wing Area 372 sq in.
• Length 43.4 inches
• Weight 2.83 pounds
• Radio 5 Channels
• Power 450 Watts (sport) to 750 Watts (3D)

What you will need to complete this airplane: 

• Transmitter / Receiver: You will need a 5 channel receiver, depending on how you power the receiver. If using a y-connector for the BEC, then you can use a 4 channel receiver. If not, use a four channel or higher receiver.
• Servos – You will need 5 (for electric power) to 6 (for engine power) servos.
• Motor – You will need either an electric motor running 450 to 750 Watts depending on the type of flying you want to perform. For sport flying, the BP A2814-6 Brushless Outrunner Motor using the BP 60A Brushless ESC swinging a APC 10 x 7 Thin Electric Gray Composite Propeller (APC10070E) . For extreme 3D, the BP A2826-4 Brushless Outrunner Motor using the BP 60A Brushless ESC swinging a APC 13 x 6.5 Thin Electric Gray Composite Propeller (APC13065E). The Castle Creations BEC SWITCHING REGULATOR is recommended.
• Battery – Use anywhere a 11.1V 3300 mAh Lipo.
• Servo Extensions / Battery Connectors – You will need three 12 inch extensions and one Y connector. And for battery connectors, try Dean’s Ultra plugs.
•  
• Adhesives – You will need thin CA glue and 5 minute epoxy.
• The ARF comes with all of the hardware that you need to complete the airplane. Included landing gear is sturdy aluminum. Plastic heatshrink covering through out. ARF comes with paper construction manual including CG and control throws.

“

 

“What you will need to complete this airplane: Transmitter / Receiver: You will need a 5 channel receiver, depending on how you power the receiver. If using a y-connector for the BEC, then you can use a 4 channel receiver. If not, use a four channel or higher receiver. Servos – You will need 5 (for electric power) to 6 (for engine power) servos. Motor – You will need either an electric motor running 450 to 750 Watts depending on the type of flying you want to perform. For sport flying, the BP A2814-6 Brushless Outrunner Motor using the BP 60A Brushless ESC swinging a APC 10 x 7 Thin Electric Gray Composite Propeller (APC10070E) . For extreme 3D, the BP A2826-4 Brushless Outrunner Motor using the BP 60A Brushless ESC swinging a APC 13 x 6.5 Thin Electric Gray Composite Propeller (APC13065E). The Castle Creations BEC SWITCHING REGULATOR is recommended. Battery – Use anywhere a 11.1V 3300 mAh Lipo. Servo Extensions / Battery Connectors – You will need three 12 inch extensions and one Y connector. And for battery connectors, try Dean’s Ultra plugs. Adhesives – You will need thin CA glue and 5 minute epoxy.”

 

“Wing Span 48 inches Wing Area 372 sq in. Length 43.4 inches Weight 2.83 pounds Radio 5 Channels Power 450 Watts (sport) to 750 Watts (3D)