HAN2365 HANGAR 9 Ultra Stick 30cc ARF 81″

HAN2365 HANGAR 9 Ultra Stick 30cc ARF 81″

THIS ITEM DOES NOT QUALIFY FOR FREE SHIPPING

Note: Graves RC Coupons are not applicable with this product  

 

Features:

• Outstanding flight performance: tried and true Ultra Stick design
• Flaps for expanded flight envelope
• Covered in genuine UltraCote™
• Tail dragger landing gear adds to its sportier looks
• Large, double beveled control surfaces
• Two piece plug in wings with aluminum tube provides easy transport and assembly
• Lightweight balsa/balsa-plywood construction that’s strong
• Float-ready-hard points for mounting the Hangar 9® 1/5-scale Float Set (sold separately) are already built into the fuselage
• Finished fiberglass wheel pants match UltraCote colors
• Ready to mount the Evolution® 33GX Gasoline Engine
• Electric motor mount included makes it EP friendly
• Complete quality hardware included

Requires:

Radio System
33GX Engine and Receiver Battery or Electric Power System
Tools and Adhesives for Assembly

Specifications:

Airfoil Shape:	Symmetrical
Approximate Assembly Time:	10-15 Hours
Approximate Flight Time:	6 Mins
CG (Center of Gravity):	4-5.25″ Rearward of wing leading edge
Completion Level:	Almost Ready-to-Fly
Control Throw (Flaps):	2.5mm Takeoff and 5.5cm Landing
Control Throw – High (Ailerons):	6.8 Cm Up and 5.5cm down
Control Throw – High (Elevator):	5.5cm Up and Down
Control Throw – High (Rudder):	7cm Left and Right
Control Throw – Low (Ailerons):	3cm Up and 2.5cm Down
Control Throw – Low (Elevator):	2.7cm Up and Down
Control Throw – Low (Rudder):	3.5cm Left and Right
Engine Size:	30cc
Expo (Ailerons):	25%
Expo (Elevator):	20%
Expo (Rudder):	20%
Flaps:	Yes
Flying Weight:	12-14 lbs (5.4 – 6.35kg)
Length:	74″ (188 cm)
Material:	Balsa
Minimum Required Radio:	6ch
Minimum Speed Control:	80 amp
Motor Size:	Power 160
Propeller Size:	17×6 – 18×10
Recommended Motor Battery:	10S 4400mAh
Recommended Receiver Battery:	6.6V 2200mAh 2S LiFe Receiver Battery (not included)
Retracts:	No
Servos:	A6180 Digital Aircraft Servo (not included)
Size/Scale:	30
Spinner Size:	3″
Trimscheme Colors:	White, Black, Apple Green
Wing Area:	1360.3 sq in (87.76 sq dm)
Wing Loading:	22.02oz./sq.ft.
Wing Tube Length:	65cm
Wing Tube OD:	31cm
Wingspan:	80.75″ (205 cm )

Manuals:

HAN2365-Manual-Multilingual

HAN2365-Addendum-Multilingual