DUM1813 DUMAS Aeronca C-3 Kit

DUM1813 DUMAS Aeronca C-3 Kit

THIS ITEM DOES NOT QUALIFY FOR FREE SHIPPING

 

Features:

Construction: Hand selected laser cut balsa
Vacuum molded nose cowl
Rudder Control: Pull-pull cables
Elevator Control: Wire pushrod
Servo Placement: Mounted in rails on fuselage
Landing Gear: 1/16″ diameter wire front, .041 diameter wire rear, requires bending

 

Includes:

All balsa, lightweight colored (black and yellow) tissue covering two 1-3/4″ (45mm) lightweight foam main wheels, CA hinges and all hardware to complete this kit, instruction manual, two full-size plan sheets, and acetate sheet for windows

 

Requires:

GWS IPS (indoor power system) motor with “A” ratio gear drive
3 channel radio system (minimum)
2 micro servos
5A ESC w/BEC
2 cell 700mAh LiPo battery
GWS 8×6 prop, 
Building and field equipment

 

Technical Specifications:

Length: 22″ (559mm)
Wingspan: 40″ (1016mm)
Wing Area: 329 sq.in. (21.25 sq dm)
Airfoil: Flat bottom, high wing placement
Center of Gravity (CG): 2.5″ (63mm) back from the leading edge of the wing at the fuselage side
Control Throws-
Elevator, Up and Down: 3/4″ (19mm)
Rudder, Left and Right: 1″ (25mm)